User manual shutter Ricoh wired controller.pdf
RC transmitter stick movement from one extreme to another will trigger the camera (see section on switch-joy on the next page.) After each activation wait the second warning before the operation continues. If the stick is held in position photos are taken every five seconds.
Switch Operation Carousel (or additional - as both will work together) you can short blue wire to the black wire on the servo connector to trigger the camera. In this mode servo connectors must be used for between 3 and 5.5V supply to the unit. Blue cable can be connected to a trigger source of your choice. You can download and read the user manual shutter Ricoh controller cable on the following link below.
Post a Comment